Bantam Tools Desktop CNC Milling Machine Review!

Share it with your friends Like

Thanks! Share it with your friends!

Close

UPDATE: Since we filmed this video (which was not sponsored), Bantam Tools has decided that, while they will still have a pro-level subscription option, they will open up full feeds and speeds override to non-subscribers. Here’s their blog post about the announcement: https://www.bantamtools.com/blog/speeds-and-feeds-override-are-included

We test and review the new Bantam Tools Desktop CNC, a powerful three-axis milling machine for precision carving of aluminum, wood, and other hard materials. Jen walks us through her experience using the CNC as a stepping stone from 3D printing and laser cutting, navigating the CAM workflow with Bantam Tools’ user-friendly software. Here’s how this machine can fit into maker spaces and home workshops to level up a maker’s digital fabrication skillset.

NOTE: This is not a sponsored video.

Shot by Jen Schachter and edited by Norman Chan

Find out more about the Bantam Tools Desktop CNC here: https://www.bantamtools.com/cnc-milling-machine

Tested Ts, stickers, mugs and more: https://teespring.com/stores/adam-savages-tested

Subscribe for more videos (and click the bell for notifications): http://www.youtube.com/subscription_center?add_user=testedcom
Join the Tested channel membership community: https://www.youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA/join
Twitter: http://www.twitter.com/testedcom
Facebook: http://www.facebook.com/testedcom
Instagram: https://www.instagram.com/testedcom/
Discord: https://www.discord.gg/tested
Amazon Storefront: http://www.amazon.com/shop/adamsavagestested
Savage Industries T-shirts: https://cottonbureau.com/stores/savage-merchandising#/shop

Tested is:
Adam Savage http://www.twitter.com/donttrythis
Norman Chan http://www.twitter.com/nchan
Joey Fameli http://www.joeyfameli.com
Gunther Kirsch https://guntherkirsch.com
Ryan Kiser https://www.instagram.com/ryan.kiser
Jen Schachter http://www.jenschachter.com
Kishore Hari http://www.twitter.com/sciencequiche
Sean Charlesworth http://www.twitter.com/cworthdynamics
Jeremy Williams http://www.twitter.com/jerware
Kayte Sabicer https://www.instagram.com/kaytesabicer
Bill Doran https://twitter.com/chinbeard
Ariel Waldman https://youtube.com/arielwaldman
Darrell Maloney https://www.youtube.com/brokennerd
Kristen Lomasney https://twitter.com/krystynlo

Intro bumper by Abe Dieckman

Thanks for watching!

#cnc #review

Comments

Adam Savage’s Tested says:

UPDATE: Since we filmed this video (which was not sponsored), Bantam Tools has decided that, while they will still have a pro-level subscription option, they will open up full feeds and speeds override to non-subscribers. Here’s their blog post about the announcement: https://www.bantamtools.com/blog/speeds-and-feeds-override-are-included

Panda _yt says:

Bruh I need a cheap one that can cut aluminum

SantaDragon says:

12:30 "Not as loud" but working with ear protection xD

TheDeathMantle says:

Know anything similar but can do steel I'm looking to make small precise steel parts.

Kurt Guy says:

Subscriptions suck.

3 dwizzel says:

cnc is so expensive

Dan Hyde says:

Is the collet Chuck removable with an R8 taper or something? 🤔

sniffles fpv says:

4K cnc mashine and the couldn’t even put in ballscrews

Charlie Brown says:

Is this an ad for Bantam tools … or a review? No disrespect to the young lady … but it honestly sounds like she is reading from a script … and watching her using that allen key … i had to look away as she tightened the bolt with the allen key half in and @ a 45 degree angle … yikes! I couldnt watch anything after that allen key scene. Im off to find a "real" review!

Johan Braanen says:

Commercial, not review

Justin Lee says:

Can it cut shape of rolex bezel?

Jeffrey Berry says:

These specs are terrible! Good construction, but it has the specs of a $300 machine for $4,000!!

WJK says:

Hmm… thinking (if need be) covering a non-conductive workpiece in a thin piece of (slightly tacky foil) might do the trick in getting the auto-probe to detect the workpiece, but then again, manual probing probably doesn't take that long.

Camelazo says:

0:56 a broken bit… lol!!

Foomanlol says:

This is a piece of junk for the price.

A Layman says:

UGH! Wordy!!! HOW much, what will it cut… 10 seconds, done!

Sandwich Drones says:

This is an Ad, not a review. This product is shit, you can have something more solid from Aliexpress for 200€. Please see an honest review on YT

Phenom Menon says:

This thing is $4000. I turned the video off when I saw that.

Henry Swan says:

0:46 is it 250w or is it 1/4 horsepower???? a/4 horsepower is 184w, not 250w
seems like a scam trying to seem more powerful

Chris Powell says:

$3600 lol silly people

George Carter says:

I don't understand! This machine is selling for $4000, but how come everything is so cheap, Nema 17 stepper motor, lead screw, 250w spindle… for the cost of all these hardware configurations, I would pay no more than $1000 for this thing.

Picto Gram says:

this is advertising and no testing, but why advertising interrupted by advertising ?!

Kainen Akcatraz says:

Ghost gunner is better.

Yu Toob says:

28K rpm spindle, it's like an air tool

Isaac Zucker says:

only a thousand dollars out from a base model tormach. why would you buy this?

renderuthis says:

You must pay extra for software!!?? no way

Write a comment

*

WordPress SEO