Crossfire CNC plasma table Titanium plasma 45

Share it with your friends Like

Thanks! Share it with your friends!

Close

I’m testing out my new Langmuir systems Crossfire CNC plasma table, I’m running it with my Harbor freight Titanium plasma 45 torch. It runs Mach 3 for the controller software and Fusion 360 for cad work.

Disclaimer: Important Safety Information
Your plasma cutter power supply will expose you to high voltage and high amperage electrical components. It is your responsibility to make sure that all work is done safely and with the power disconnected. If you have any doubts regarding your ability to safely perform this work, you should consult the services of a professional electrician. Mike Festiva will not be held responsible for any injury or death resulting from the incorrect or unsafe execution of this procedure.

Comments

Mike festiva says:

If you are interested in this CNC table here’s a link to the website http://store.langmuirsystems.com?aff=16 and if you plan on buying one, Here is a promo code that will save you $100 off your table! The Code is MIKEFESTIVA This is a affiliate link so I get a little kick back and you save $100 so it’s a win win 🙂 take care

Rigo Moreno says:

Hows the table working with titanium?

jonathon boler says:

Can you please do a video on how you wired your plasma cutter to your tablets operating system? I am trying to get my Tracker CNC table repowered with a more affordable plasma cutter than the thermal dynamics cut 80 that I bought with it, I have had nothing but problems with that plasma cutter and would actually like to use the 16,000 dollar table I have collecting dust. I just don't have the money to buy another 4,000 dollar plasma cutter right now or in the near future that I can see.

Richard Shea says:

Have you indexed larger plates?

Michael Baron says:

When setting up the Titanium 45 with the Langmuir table, what did you enter for the kerf size? I've searched everywhere online and cant find anything. Thanks in advance, great videos!

Austin Monroe says:

Hey Mike! I just got the same table and cutter. How did you connect your cutter to the CNC table?

The Fred Channel says:

When you bought the titanium and the table did you have a hard time getting it to work? Has it gave you any issues so far I plan on buying one

Marcos Castelan says:

Can one cut design from 304 stainless steel 14 gauge? designs like 6 in x 6in.

Instant Karma says:

laptop stand looks great!

Keyfarm says:

Really good information, thanks !

Write a comment

*

WordPress SEO