Testing the most affordable CNC plasma cutter on Amazon Hynade CUT60DN

Share it with your friends Like

Thanks! Share it with your friends!


The Hynade CUT60DN is a free hand plasma cutter but with the added features of plug and play CNC connections.
Not all plasma cutters are created equally, most cutters produce high frequency interference that can damage CNC equipment, the CUT60DN is a blow back pilot arc start and is designed to work with most CNC plasma cutters.
If you are interested in a Crossfire CNC table I definitely recommend considering this plasma as a great affordable plasma cutter for your table.

*This is the Crossfire CNC plasma table from Langmuir systems*
Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!

*Link to videos mentioned in this video*
Crossfire PRO CNC plasma table from Langmuir systems https://youtu.be/EMJFn1tOgh0
DIY plasma cutting table https://youtu.be/yJ8M_CXbzoo
Magnetic Chuck Grinding Station https://youtu.be/o-t046dVXEw

*Amazon Paid Affiliate Links Below:*
Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5% on selected Hynade produces.
The Hynade CUT60DN CNC Blow back pilot arc plasma https://amzn.to/3G3oxhj *(This is the one in the video)*
The Hynade CUT80 Plasma Cutter https://amzn.to/3wqpP2F
Plasma Consumables for CUT60DN https://amzn.to/3Myn1Gu
The Hynade AC/DC 200amp Tig Welder https://amzn.to/3Ltk9ta
Amp Foot Petal for Hynade Tig 200 https://amzn.to/384nXU0
Shop Fox M1011 24-Inch Box and Pan Brake- https://amzn.to/3lsz9g5
Flame Resistant Welding Sleeves https://amzn.to/307x9D0
Miller ML00895 Lpr-100 Respirator https://amzn.to/3yabsP6
YESWELDER Auto Darkening Welding Helmet https://amzn.to/3oAD78J
Shade 5 Plasma Glasses https://amzn.to/3y7oVaB

*Here’s a paid affiliate link to Yeswelder website*
YESWELDER LINK: https://yeswelder.com/?ref=s6nzvjxbwejy
SAVE 10% on your entire order! Use Promo code MIKEFESTIVA and it helps me out a little bit too 👍
You can find auto dim helmets here.


Mike festiva says:

Amazon Paid Affiliate Links Below
Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5%
Here's the link to the Hynade CUT60DN CNC Blow back pilot arc plasma https://amzn.to/3G3oxhj
Plasma Consumables for CUT60DN https://amzn.to/3Myn1Gu

2alpine15 says:

Awesome video. Sold on the plasma . Amazon promo doesn't work.

Jack In The Shop says:

Got my Cut60DN in yesterday. Used it just a bit today. Keeps loosing the flame. I did have it under 20 amps on a 110 circuit. Need to get a 220 in the shop.and the metal was rusty. Do you know what is the min. air requirements to be stable on a CNC?

Custom Solutions says:

so, i noticed at 16min you cut what you said was 16guage metal the n bent it on your brake. i did not notice any relief cuts, but the brake is only rated for 22guage… Have you noticed any effects other than it being tougher to bend….? I recently purchased a 48in rated for 16 gauge, and that was a concern of mine (others only being rated for 22guage) Alson based on your suggestion I picked up a cut80 for my 4'X4' table thanks for sharing your vid and info

bagrnut says:

I must have the videos mixed up, I was looking for the link to the break bend table. Thanks again Mike.

Pete’s has Lloyd says:

Hay Mikes watch most of your videos! In one of them you used a template that had different size round holes and slots that were also different shapes .
Did you make that or buy it ? Nice addition for hand cutting I would like to have one if you can tell me where to get one . Maybe put it on Langmuir share page

Tony Cee says:

excellent mike thenk yuo

flacco583 says:

Great video Mike. Was wanting one and then I see this video so, you talked me into it. Just arrived and tested it out. Amazing. Eventually it will be paired up with the Crossfire table. Getting close to start fabbing up some fun machines like you.

michael stokoe says:

Thanks for the video, but basic info fir beginners would be nice…compressor requirements, plug into standard wall socket or dedicated isolator etc.

Thomas Thomas says:

Hello Mike,
If I buy the smaller crossfire, can I later just buy/build longer rails to expand it?

Quarlow 12 says:

I hit your like button as soon as I click the video. Always great content Mike.

Kyle says:

One of my favorite YouTubers. Keep up the good work man. I followed you on your 212 dirtbike build. I put a 79 predator on a razor bike

Ross Hog Smokers says:

I have had this on my wish list for a couple months, I think it has been since you did the video on the bestarc, I decided to pull the trigger based on this video! I think this is going to work well for when I finally build my plasma table.

Radames Rodriguez says:

Excellent video ! Do you have a video on how to program the computer for plasma, how to cut the pieces. Thank Radames

Colen Casey says:

you might want to check out the primeweld cut60 same features has cnc connection and it has a full 3 year warranty

Dean Kay says:

Mike, this out of sequence but a thought you may see & use on the center-articulation tractor you build removable front fenders for. Since you can remove then in the field, find a spot and weld two squares these can be stored in. Like the side the the dump bed! It is better that tossing them into the back to get scratches or bent. Just a thought.
I worked on our family farm equipment since I was the oldest but this was before you were born. But leaving home at 14 (Family issues) but never went to tech school or high school did have a shop. But I spent my entire life working on vehicles & the last 7 teaching & holding tech seminars in 7 Midwest states before Dr. pulled the plug on working. Had a boss argue for 20 minutes to run a rented jumping jack earth compactor at 28 and destroyed my back. It got better to work at dealer, but old age has this “arthritis” thing and had 11 procedures, finally implant with spinal electrodes and they placed them wrong. So can’t even walk, just enough to mail box. Enjoyed the build surround by tools and use them ten minutes out of every 2-3 hrs. I had no cell since 2008 and YouTube has been fun. I have to learn aftermarket parts to build a 67 C10 to have a vehicle. At 6’ 3”, I don’t fit well in most even average weight but getting in & out is real hard. The truck fits and given free. A EFI Tahoe engine will make reliable and the OD auto I built on bench 2019 will help with fuel and made to handle 600HP with a basic stock 390 HO engine so I don’t have do repairs. All GM parts that are common & priced well. But, I have to get room in my garage as it is a 1 1/2 car to begin!
Enjoy the vids, but having a place to hang your fenders when off is an idea.

mitch monnett says:

Mike where can I find the manual online for the hynade cut60dn ?

John Aughey says:

Excellent! I'm building a new CNC, and would like to add a plasma cutter so I'm watching and learning. It's good to get a recommendation to know what the price of entry is, and what to look for for this type of application. It looks like there is a straight torch cutting head available too.

Gabriel G Louw says:

This thing has absolutely no reviews on Amazon. That makes me very suspicious.

David Hetteen says:

Another great product review video Mike. I am so glad that you do these since I, and a couple of my friends, are very interested in these same tools. You also do a great job on your project videos. You have great ingenuity and an ability to think outside of the box. Keep up the great work! Also, it is cool that you are a fellow western Washingtonian (I live on Camano Island). Two thumbs up!

dave barnhart says:

Great video Mike! I appreciate all the info. I ordered the crossfire pro (thanks for the $100 off coupon) After watching this video, I ordered this cutter too. I am hearing we need dry air coming to the torch. What do you use for air compressor and keeping the air dry? Thank you for such great content on this channel!

Alex says:

Hi Mike, wonder if you would you recommend this plasma cutter over any other or was this recommendation solely based on price and its ability to be used with the table? Thanks for making this video btw… really hyped on buying the table soon too 🙂

Ex-Law Enforcement says:

YES, it IS Amazing how much cheaper the "Plasma Cutter's" are now-a-days. my first one cost me over $3500.00 back in the mid-1990's and it Was Huge also an "Console Unit". Thanks for the Tip's in this video and the Saving's too I just might get one of these and try it out, Thanks.

Erick VonD says:

Having seen this I find myself curious as to how well a MIG or TIG would perform along these same lines.

Write a comment